- Beiträge: 1156
- Dank erhalten: 844
Sun visor repair
- Racediagnostics
- Autor
- Offline
- Elite
- UK spec
Weniger
Mehr
02 Mai 2021 17:49 #274831
von Racediagnostics
Cheers
Jim
Dieses Bild ist für Gäste verborgen.
1979 450SL - 2002 XK8 4.2
Sun visor repair wurde erstellt von Racediagnostics
My passenger sun visor rattled (the mirror rattling against internal card) and both the passenger and driver visor looked poor, so I watched a couple of youtube videos and started the repairs. I used a different method to the videos and think I have improved results.
The padding had disintegrated and the mirror is pitted.
Dieses Bild ist für Gäste verborgen.
I cut open the top edge with a scalpel along the seam.
Dieses Bild ist für Gäste verborgen.
The contents.
Dieses Bild ist für Gäste verborgen.
The driver side was in slightly better condition.
Dieses Bild ist für Gäste verborgen.
Dieses Bild ist für Gäste verborgen.
I cut out the shape from a 25mm foam sheet and bevelled the edges.
Dieses Bild ist für Gäste verborgen.
Cut a slit round the edge of the foam and inserted the wire frame.
Dieses Bild ist für Gäste verborgen.
I then glued the lower edge and sides of the foam to encapsulate the wire frame. Top edge left open.
Dieses Bild ist für Gäste verborgen.
Trial fit, it helps to heat up the vinyl cover with warm air to allow the frame to be inserted easier.
Dieses Bild ist für Gäste verborgen.
The padding had disintegrated and the mirror is pitted.
Dieses Bild ist für Gäste verborgen.
Bitte anmelden oder registrieren um das Bild zu sehen.
I cut open the top edge with a scalpel along the seam.
Dieses Bild ist für Gäste verborgen.
Bitte anmelden oder registrieren um das Bild zu sehen.
The contents.
Dieses Bild ist für Gäste verborgen.
Bitte anmelden oder registrieren um das Bild zu sehen.
The driver side was in slightly better condition.
Dieses Bild ist für Gäste verborgen.
Bitte anmelden oder registrieren um das Bild zu sehen.
Dieses Bild ist für Gäste verborgen.
Bitte anmelden oder registrieren um das Bild zu sehen.
I cut out the shape from a 25mm foam sheet and bevelled the edges.
Dieses Bild ist für Gäste verborgen.
Bitte anmelden oder registrieren um das Bild zu sehen.
Cut a slit round the edge of the foam and inserted the wire frame.
Dieses Bild ist für Gäste verborgen.
Bitte anmelden oder registrieren um das Bild zu sehen.
I then glued the lower edge and sides of the foam to encapsulate the wire frame. Top edge left open.
Dieses Bild ist für Gäste verborgen.
Bitte anmelden oder registrieren um das Bild zu sehen.
Trial fit, it helps to heat up the vinyl cover with warm air to allow the frame to be inserted easier.
Dieses Bild ist für Gäste verborgen.
Bitte anmelden oder registrieren um das Bild zu sehen.
Cheers
Jim
Dieses Bild ist für Gäste verborgen.
Bitte anmelden oder registrieren um das Bild zu sehen.
1979 450SL - 2002 XK8 4.2
Folgende Benutzer bedankten sich: hhermanski, SchwagerB
Bitte Anmelden oder Registrieren um der Konversation beizutreten.
- Racediagnostics
- Autor
- Offline
- Elite
- UK spec
Weniger
Mehr
- Beiträge: 1156
- Dank erhalten: 844
02 Mai 2021 17:49 - 02 Mai 2021 18:01 #274832
von Racediagnostics
Cheers
Jim
Dieses Bild ist für Gäste verborgen.
1979 450SL - 2002 XK8 4.2
Racediagnostics antwortete auf Sun visor repair
Before final fitting I glued a long tab to the inside edge of the vinyl cover using 3M vinyl glue.
Dieses Bild ist für Gäste verborgen.
I then glued the second side of the vinyl cover to the tab taking care to match up the join between the two sides. I glued about 15mm at a time then taped it down.
Dieses Bild ist für Gäste verborgen.
The end result looks like this.
Dieses Bild ist für Gäste verborgen.
The more time and care taken when gluing the better the end result.
Dieses Bild ist für Gäste verborgen.
I purchased a small piece of perspex mirror for the passenger side although this is not an ideal solution as perspex scratches very easily.
Dieses Bild ist für Gäste verborgen.
Cut out the correct shape.
Dieses Bild ist für Gäste verborgen.
Sanded to the correct size.
Dieses Bild ist für Gäste verborgen.
Glued into place.
Dieses Bild ist für Gäste verborgen.
I nibbled out a recess in the foam to allow space for the mirror and frame.
Dieses Bild ist für Gäste verborgen.
The passenger side was then finished the same way as the driver side.
Dieses Bild ist für Gäste verborgen.
Bitte anmelden oder registrieren um das Bild zu sehen.
I then glued the second side of the vinyl cover to the tab taking care to match up the join between the two sides. I glued about 15mm at a time then taped it down.
Dieses Bild ist für Gäste verborgen.
Bitte anmelden oder registrieren um das Bild zu sehen.
The end result looks like this.
Dieses Bild ist für Gäste verborgen.
Bitte anmelden oder registrieren um das Bild zu sehen.
The more time and care taken when gluing the better the end result.
Dieses Bild ist für Gäste verborgen.
Bitte anmelden oder registrieren um das Bild zu sehen.
I purchased a small piece of perspex mirror for the passenger side although this is not an ideal solution as perspex scratches very easily.
Dieses Bild ist für Gäste verborgen.
Bitte anmelden oder registrieren um das Bild zu sehen.
Cut out the correct shape.
Dieses Bild ist für Gäste verborgen.
Bitte anmelden oder registrieren um das Bild zu sehen.
Sanded to the correct size.
Dieses Bild ist für Gäste verborgen.
Bitte anmelden oder registrieren um das Bild zu sehen.
Glued into place.
Dieses Bild ist für Gäste verborgen.
Bitte anmelden oder registrieren um das Bild zu sehen.
I nibbled out a recess in the foam to allow space for the mirror and frame.
Dieses Bild ist für Gäste verborgen.
Bitte anmelden oder registrieren um das Bild zu sehen.
The passenger side was then finished the same way as the driver side.
Cheers
Jim
Dieses Bild ist für Gäste verborgen.
Bitte anmelden oder registrieren um das Bild zu sehen.
1979 450SL - 2002 XK8 4.2
Letzte Änderung: 02 Mai 2021 18:01 von Racediagnostics.
Folgende Benutzer bedankten sich: KalliSL, PanTau, gelberbenz, Chromix, hhermanski, che72, KaiDase, SchwagerB
Bitte Anmelden oder Registrieren um der Konversation beizutreten.
- Dr-DJet
- Offline
- Moderator
03 Mai 2021 09:13 #274855
von Dr-DJet
Viele Schraubergrüße - best regards, Volker, Admin und Betreiber dieser Webseite
Fast alles zu Zündung und Jetronic auf jetronic.org
Workshop Hzg/Klima 13.4 (ER), D-Jetronic 8.6. (F) & 20.7. (ER), K-Jetronic 29.6. (ER) & 31.8. (F)
Dieses Bild ist für Gäste verborgen.
Dr-DJet antwortete auf Sun visor repair
Hi Jim,
that looks great! Can we use it for an article? And please also a picture of visor with mirror when it is finished.
that looks great! Can we use it for an article? And please also a picture of visor with mirror when it is finished.
Viele Schraubergrüße - best regards, Volker, Admin und Betreiber dieser Webseite
Fast alles zu Zündung und Jetronic auf jetronic.org
Workshop Hzg/Klima 13.4 (ER), D-Jetronic 8.6. (F) & 20.7. (ER), K-Jetronic 29.6. (ER) & 31.8. (F)
Dieses Bild ist für Gäste verborgen.
Bitte anmelden oder registrieren um das Bild zu sehen.
Bitte Anmelden oder Registrieren um der Konversation beizutreten.
- Racediagnostics
- Autor
- Offline
- Elite
- UK spec
Weniger
Mehr
- Beiträge: 1156
- Dank erhalten: 844
03 Mai 2021 09:29 #274858
von Racediagnostics
Cheers
Jim
Dieses Bild ist für Gäste verborgen.
1979 450SL - 2002 XK8 4.2
Racediagnostics antwortete auf Sun visor repair
Yes, of course, I'll take some more pictures once fitted.
Cheers
Jim
Dieses Bild ist für Gäste verborgen.
Bitte anmelden oder registrieren um das Bild zu sehen.
1979 450SL - 2002 XK8 4.2
Bitte Anmelden oder Registrieren um der Konversation beizutreten.
- Racediagnostics
- Autor
- Offline
- Elite
- UK spec
Weniger
Mehr
- Beiträge: 1156
- Dank erhalten: 844
03 Mai 2021 15:10 #274879
von Racediagnostics
Cheers
Jim
Dieses Bild ist für Gäste verborgen.
1979 450SL - 2002 XK8 4.2
Racediagnostics antwortete auf Sun visor repair
Update.
I wasn't happy with the perspex mirror, I found that it could easily be scratched with tissue paper when cleaning, so this morning I went to the car salvage yard and took the glass mirror out of an old E class sun visor. The dimesions were correct for the mirror width but not the length.
Dieses Bild ist für Gäste verborgen.
After cutting the the dimentions were 58mm x 112mm. I rounded the corners off using a belt sander.
Trial fit.
Dieses Bild ist für Gäste verborgen.
Then glued in place with PU sealer.
Dieses Bild ist für Gäste verborgen.
A couple of other pics that may be useful. Here is the slot for the wire frame after I glued it back together, just the bottom and sides.
Dieses Bild ist für Gäste verborgen.
This is the vinyl material I used to create the new tab along the top edge to help glue both sides together.
Dieses Bild ist für Gäste verborgen.
Dieses Bild ist für Gäste verborgen.
I wasn't happy with the perspex mirror, I found that it could easily be scratched with tissue paper when cleaning, so this morning I went to the car salvage yard and took the glass mirror out of an old E class sun visor. The dimesions were correct for the mirror width but not the length.
Dieses Bild ist für Gäste verborgen.
Bitte anmelden oder registrieren um das Bild zu sehen.
After cutting the the dimentions were 58mm x 112mm. I rounded the corners off using a belt sander.
Trial fit.
Dieses Bild ist für Gäste verborgen.
Bitte anmelden oder registrieren um das Bild zu sehen.
Then glued in place with PU sealer.
Dieses Bild ist für Gäste verborgen.
Bitte anmelden oder registrieren um das Bild zu sehen.
A couple of other pics that may be useful. Here is the slot for the wire frame after I glued it back together, just the bottom and sides.
Dieses Bild ist für Gäste verborgen.
Bitte anmelden oder registrieren um das Bild zu sehen.
This is the vinyl material I used to create the new tab along the top edge to help glue both sides together.
Dieses Bild ist für Gäste verborgen.
Bitte anmelden oder registrieren um das Bild zu sehen.
Dieses Bild ist für Gäste verborgen.
Bitte anmelden oder registrieren um das Bild zu sehen.
Cheers
Jim
Dieses Bild ist für Gäste verborgen.
Bitte anmelden oder registrieren um das Bild zu sehen.
1979 450SL - 2002 XK8 4.2
Bitte Anmelden oder Registrieren um der Konversation beizutreten.
- KaiDase
- Offline
- Senior
03 Mai 2021 19:16 #274908
von KaiDase
Kai
Mercedes R350, 11/2006
Cherokee 2.5, 04/2000
Hyundai H1 4x4 07/1999
KaiDase antwortete auf Sun visor repair
Looks great Jim! I'm glad to hear that vinyl glue works well for these jobs. So originally they have a card in the middle and foam on either side? You left the card out?
Fortunately this is a job I don't seem to need to do (and for my former /8 I bought a better second hand version). But it's a neat repair all the same.
Best wishes,
Fortunately this is a job I don't seem to need to do (and for my former /8 I bought a better second hand version). But it's a neat repair all the same.
Best wishes,
Kai
Mercedes R350, 11/2006
Cherokee 2.5, 04/2000
Hyundai H1 4x4 07/1999
Bitte Anmelden oder Registrieren um der Konversation beizutreten.
- Racediagnostics
- Autor
- Offline
- Elite
- UK spec
Weniger
Mehr
- Beiträge: 1156
- Dank erhalten: 844
03 Mai 2021 20:32 #274914
von Racediagnostics
Cheers
Jim
Dieses Bild ist für Gäste verborgen.
1979 450SL - 2002 XK8 4.2
Racediagnostics antwortete auf Sun visor repair
Hello Kai,
Since I'm using thicker foam padding the card is not needed, it is stiff enough without it.
Since I'm using thicker foam padding the card is not needed, it is stiff enough without it.
Cheers
Jim
Dieses Bild ist für Gäste verborgen.
Bitte anmelden oder registrieren um das Bild zu sehen.
1979 450SL - 2002 XK8 4.2
Bitte Anmelden oder Registrieren um der Konversation beizutreten.
- BerndZimmermann
- Offline
- Senior
Weniger
Mehr
- Beiträge: 303
- Dank erhalten: 44
03 Mai 2021 21:09 #274918
von BerndZimmermann
BerndZimmermann antwortete auf Sun visor repair
Just one remark to avoid a pitfall that I went through:
The side towards the front window was too think in the end so that the sun visor could not be lowered fully. It touched the A-Säule (englisch word missing ).
So either it was too thick or the original version was asymetric in thickness.
Bernd
The side towards the front window was too think in the end so that the sun visor could not be lowered fully. It touched the A-Säule (englisch word missing ).
So either it was too thick or the original version was asymetric in thickness.
Bernd
Folgende Benutzer bedankten sich: Racediagnostics
Bitte Anmelden oder Registrieren um der Konversation beizutreten.
- Racediagnostics
- Autor
- Offline
- Elite
- UK spec
Weniger
Mehr
- Beiträge: 1156
- Dank erhalten: 844
08 Mai 2021 15:44 #275234
von Racediagnostics
Cheers
Jim
Dieses Bild ist für Gäste verborgen.
1979 450SL - 2002 XK8 4.2
Racediagnostics antwortete auf Sun visor repair
Final pictures.
Dieses Bild ist für Gäste verborgen.
Dieses Bild ist für Gäste verborgen.
Dieses Bild ist für Gäste verborgen.
Bitte anmelden oder registrieren um das Bild zu sehen.
Dieses Bild ist für Gäste verborgen.
Bitte anmelden oder registrieren um das Bild zu sehen.
Cheers
Jim
Dieses Bild ist für Gäste verborgen.
Bitte anmelden oder registrieren um das Bild zu sehen.
1979 450SL - 2002 XK8 4.2
Folgende Benutzer bedankten sich: Hanso, SchwagerB
Bitte Anmelden oder Registrieren um der Konversation beizutreten.
- SchwagerB
- Offline
- Senior
Weniger
Mehr
- Beiträge: 151
- Dank erhalten: 55
28 Aug. 2021 08:31 #282145
von SchwagerB
Freundlich grüßt
Andreas
Be careful, when you blindly follow the masses. Sometimes the m is silent
SchwagerB antwortete auf Sun visor repair
Great job, thanks for sharing!
Freundlich grüßt
Andreas
Be careful, when you blindly follow the masses. Sometimes the m is silent
Bitte Anmelden oder Registrieren um der Konversation beizutreten.
Moderatoren: Ragetti, Obelix116
Ladezeit der Seite: 0.120 Sekunden