Chrom-Kennzeichenhalter

Hallo Gerd,

welche Bestellnummern haben die Chromschrauben, die Bleche habe ich schon...

Grüßle Thomas

Leider hab ichs im Moment nicht im Zugriff, die verchromten 5mm Schrauben sind aber bei allen Modellen aus de 70/80ern gleich, mal mit Schlitz mal mit Kreuzschlitz.

Gerd

On 2006-01-24 17:36, Lionel wrote:
Hello,

I am French and unfortunately it is sometimes hard for me to understand perfectly in German.

I just bought two (one front and one back) licence plate underlays -(Kennzeichenblende) to put on my 107. I am wondering how to fix these to the body and also how to fix the plates to the underlays.

At the back of the car, there are 4 screws to fix the underlay to the body but if I do that I will have a gap between the underlay and the plate of about 2mm (height of the screw head) and I dont think the plate will be fitted correctly. Should I make 4 holes in the plate and screw across the plates ?

-To fix the chomiumplate to the body you need two screws, than (on the original plate) are holes for four rubber gapholders to avoid scratches and vibration noises.

At the front of the car, how should I fix the underlay to the black metal support ? With screws also ? In that case, which holes should I use ? Finally, if I do that I will have the same issue as at the back, meaning that I will have a gap between the plate and the underlay !

-Fix the licence an the chromium plates together in one part with two srews on the black metall sheet, will say if you remove the licence plate, youll -remove the chromium plate too!

Vielen Dank für Ihre Hilfe !

Gruss

Lionel

gerd[ Diese Nachricht wurde bearbeitet von : gerd am 24-01-2006 22:54 ]

Ebay?! Habe selber noch 2 oder 3 Paar. Gehen bei Ebay für 20-25 Euro weg ( je paar)
Gruß vom Niederrhein

Vielen Dank Gerd.

At the front its OK. Understood.

At the rear, I have the four rubber gapholders that I will put at the four corners of the chromium plate. This part is OK also.

What I still dont understand is that at the rear I dont have two but four holes both on the chromium plate and on the body in order to fix the chromium plate.

Is the normal way to fix the plate to the chromium plate is to do four holes in the plate also and do the same as at the front, meaning fixing the chromium plate and the plate together to the body ?

Thanks for your help.

Lionel

P.S. : if needed I have a photo of the chromium plate with the four holes I am talking about.

@ Lionel:

Right, at the back you fix the licence plate and the underlay together with the four screws you described using the rubber rings between body and underlay in order to avoid vibrations, scratches and noise.

Best regards,

Marcus

On 2006-01-25 08:59, Lionel wrote:
Vielen Dank Gerd.

At the front its OK. Understood.

At the rear, I have the four rubber gapholders that I will put at the four corners of the chromium plate. This part is OK also.

What I still dont understand is that at the rear I dont have two but four holes both on the chromium plate and on the body in order to fix the chromium plate.

Is the normal way to fix the plate to the chromium plate is to do four holes in the plate also and do the same as at the front, meaning fixing the chromium plate and the plate together to the body ?

Thanks for your help.

Lionel

P.S. : if needed I have a photo of the chromium plate with the four holes I am talking about.

Sorry Lionel, i made a mistake, there are four holes also on the rear, so, like on the frontside, you fix the chromium an licence Plate together!

Gerd

Klar. Vielen Dank zu Ihnen.

Lionel